TINIUS OLSEN PRODUCTS
| UNIVERSAL TESTING MACHINE,
HYDRAULIC TYPE |
 |
SUPER L
- Up to 3,000 kN of force applied by
advanced digital control.
- Accuracy is within +/- 0.5%of the indicated load from 0.2% to
100% of capacity.
- Super “L” systems are guaranteed to meet ASTM, ISO, and other
national specification.
- Suitable for tension, compression, transverse, and other tests
on materials.
- Super “L” includes a remote handheld controller with an LCD
and an extended cord.
- As an option, the Super “L” can be supplied with closed-loop
servo control capability.
- Software that can be added to the Super “L” for data
acquisition and for PC control. |
| UNIVERSAL TESTING MACHINE,
FLOOR TYPE |
 |
U SERIES
(NEW)
- 100 kN to 300 kN of force applied by
advanced digital control.
- Force accuracy of 0.5% of applied load across the load cell
display range.
- Position measurement accuracy: +/- 0.01% of reading.
- Speed range 0.01 to 500 mm/min.
- Space between columns 650 mm.
- PC control via high speed RS232 using ASCII and super high
speed binary modes. |
| UNIVERSAL TESTING MACHINE,
BENCHTOP TYPE |
 |
S/T
SERIES
- These machines are designed to test a wide range of materials,
including, but not limited to: plastics, films, paper, packaging
materials, non-woven fabrics, filter material, felt, leather,
adhesives, foils, food, toys, medical products and components
etc., in
tension, compression, flexure, shear and peel.
- 1kN to 100kN maximum capacity.
- Force accuracy of 0.5% of applied load across the load cell
display range.
- Position measurement accuracy: +/- 0.01% of reading.
- Speed accuracy: +/- 0.005% of set speed.
- PC control via high speed RS232 using ASCII and super high
speed binary modes. |
| IMPACT TESTER FOR PLASTIC |
 |
IT503/IT504
- Basic pendulum capacity 2.82 J.
- Up to 25 J with additional weights.
- Aerodynamic compound pendulum.
- Selectable energy units of J, in.lb, ft.lb, kgf.cm, kgf.m.
- Break type input options of Complete, Hinge, Partial,
Non-Break and Necking.
- Automatic or manual Toss Correction.
- Automatic calibration for bearing windage and friction.
- Real time display of energy is available for verifying the
display accuracy against traceable measurements of pendulum
height and weight |
| MELT FLOW INDEXER |
 |
MP200/MP600
- Method A and B support.
- Operation to 450 C with control and display to 0.1 C.
- Two zones PID control of temperature.
- Program storage up to 25 sets of user programmable test
parameters.
- Self-diagnostic error detection
- Communication port for connecting to computer or printer.
- Optional loading weight support and automatic cleaner. |
| HEAT-DISTORSION TESTER (HDT) &
VICAT |
 |
603 HDTM
- Fully automatic control of entry test cycle.
- Temperature range ambient to 300 C.
- LVDT measurement detection in 0.001 mm.
- Bath has port with an exhaust fan to remove interior oil
fumes.
- Air bearing guide loading rod to virtually friction free load
application.
- Built-in heat exchanger for rapid system cooldown.
- Pneumatic stations lift for easy specimen insertion and
removal. |
| IMPACT TESTER FOR METAL |
 |
IT406/IT542
- Basic pendulum capacity 406 J.
- Available model capacity at 542 J.
- Charpy, Izod and Tension Impact configuration support.
- Optional low blow fixture that allows all impact tests to be
performed at any of 55 velocity/energy levels.
- A safety lock hold the pendulum in its raised position and
assures a vibration-free when activated.
- Total frictional and windage losses during the pendulum swing
are guaranteed not more than 0.5% of energy range.
- Communication port for connecting to computer or printer.
|
| TORSION TESTER |
 |
TORSION
TESTER
- Torque range 100,000 to 3,000,000 N.m.
- Torque measurement accuracy 0.5% of indicated torque.
- Position measurement accuracy 0.1% of 0.05 degree reading.
- Test speed 5 to 360 degrees/min with accuracy 0.5% of setting.
- Bi-Directional grips assure slip-free specimen clamping.
- Communication port for connecting to computer or printer.
|
|
