Tel. 0-2965-2090 to 2
Fax. 0-2965-2093 Email.
center@calservethailand.com
www.calservethailand.com
PAINT TEST EQUIPMENT PRODUCTS
PAINT INSPECTORS KIT
PAINT INSPECTORS KIT
Package is contained
- Coating Thickness Meter
- Set of 8 Precision Measured Calibration Foils
- Steel Zero Plate
- Digital Thermometer with surface contact thermocouple
- RH%-Dew point Meter
- Wet Film Gauge (Stainless, range 25μm to 1,500μm 45 teeth)
- Testex Tape roll (X-Coarse)
- Burnishing tool
- ISO Surface Roughness Comparator
- Inspection Manual of Coating Defects
- X7 Illuminated Magnifier
- Full set of calibration certificates
COATING THICKNESS METER
EBAN 2000 / EBAN 3000
- Ferrous / Non Ferrous probe support.
- Accuracy +1%.
- Up to 2000 micron measuring range.
- UKAS Certificate.
GLOSS METER
Gloss Meter
- 20 and 60 degree of measuring.
- Resolution 0.1 Gloss unit.
- Accuracy +1%.
CROSS HATCH CUTTER
Cross Hatch Cutter
- 1 mm cutters for coating under 60 micron.
- 2 mm cutters for coating over 60 micron.
- Optional adhesive tape and viewing lens.
PENCIL HARDNESS TESTER
Pencil Hardness Tester
- Range from 5B to 5H.
- Design allows tests to be made on surfaces at any angle.
- Traceable test method uses high quality hardness graded
pencils.
